Desensitizing Agent Previously Applied During In-Office Bleaching: A Double-Blind Randomized Clinical Trial

Abstract Objective: To compare the clinical effect of two desensitizing agents used before the application of a bleaching gel based on 35% hydrogen peroxide (HP). Material and Methods: 30 patients were selected, and two desensitizing agents with different mechanisms of action were applied: Fluorine Neutral 2% (FN), which acts by blocking dentinal canaliculi while Potassium Nitrate 5% with 2% Sodium Fluoride (PN/SF) that acts in nerve transmission and blockade. Desensitizers were used before the application of 35% HP. For whitening, three clinical sessions were performed, with an interval of seven days, with three applications of the bleaching gel for 15 minutes, totaling 45 minutes/session. Tooth sensitivity (TS) was assessed with the numerical analog scale, and a spectrophotometer was used to obtain the color variation (ΔE). ΔE were submitted to ANOVA and Tukey test (p<0.05), and TS data were submitted to a two-way ANOVA analysis. Results: For sensitivity experience, the Tukey test indicated differences between PN/SF and the placebo I, but there was no statistically significant difference between FN and the placebo II. The TS was lower when the desensitizing gel was used during the bleaching procedure compared to after treatment, regardless of the desensitizing agents. Conclusion: PN/SF before in-office tooth bleaching can reduce TS intensity, and the use of desensitizing gel before bleaching did not affect the bleaching efficacy.

Fluoride in Bottled Waters Consumed in Northeastern Brazil

ABSTRACT Objective: To assess the fluoride concentration of bottled waters from municipalities in northeastern Brazil. Material and Methods: Bottled mineral waters were purchased in two periods at different commercial places of four large municipalities (João Pessoa, Campina Grande, Patos, and Cajazeiras) in the Paraíba state. The municipalities selected to present the following annual average temperature: João Pessoa 26.5 °C, Campina Grande 23.3 °C, Patos and Cajazeiras 27.5 °C. Fluoride concentration was determined using a combined ion-specific electrode. Readings (in mV) were conducted in triplicates for each standard solution and converted into fluoride concentration (mg F/L) using the Excel® software. Results: A total of 72 samples from six brands of bottled water were analyzed. The fluoride concentrations of all samples were low (0.11-0.21mg/L) but higher than those reported on the label and varied among different batches of the same brand. Conclusion: The fluoride levels in bottled water vary among brands, and these actual values are not stated in the labels.

Effect of Toothpaste Fluoride Concentration on Color Stability of Resin Composites: An In Vitro Study

ABSTRACT Objective: To investigate the effects of two different dentifrice fluoride concentrations on the color stability of the composite. Material and Methods: Twenty-seven specimens (2×4×5 mm) each of microfilled (Gradia, GC, Japan) and nanohybrid (Grandio, VOCO, Germany) composites were prepared. The specimens were randomly divided into six groups (control, Fluoflor caries protection toothpaste with 1450ppm Fluoride (EXW, France), and Fluoflor kids toothpaste with 500ppm Fluoride (EXW, France) (n = 9). The specimens were immersed in a mixture of artificial saliva and toothpaste in a ratio of 1:3 and applied for 60 seconds every 12 hours for 42 days. The control samples were incubated in artificial saliva at 37°C. Primary and secondary color measurements were performed using color parameters (L∗a∗b) with a spectrophotoshade (MHT Optic Research AG, Niederhasli, Switzerland). Data were analyzed using a two-way analysis of variance at a significance level of 0.05. Results: According to the two-way ANOVA analysis, there was no significant difference in color change between the composites and no difference in the level of discoloration between different fluoride concentrations(p>0.05). Also, None of the dentifrices caused clinically significant color changes(∆E˂3.3). Conclusion: No clinically unacceptable color changes were observed in the microfilled and nanofilled composites with different concentrations of fluoride toothpaste.

Efeito protetor de enxaguatórios com diferentes fluoretos utilizados previamente aos desafios erosivos/abrasivos em esmalte e dentina / Protective effect of solutions with different fluorides used previously to erosive/abrasive challenges in enamel and dentin

Aim: To evaluate the protection offered by commercial mouthwashes containing sodium fluoride or stannous chloride associated with sodium fluoride to enamel and dentin, prior to erosive and abrasive cycling. Materials and Methods: Enamel and dentin samples were obtained from bovine incisors and subdivided into 3 groups (n=10), according to the fluoridated ingredient tested: FS (sodium fluoride - NaF (225 ppm)); FE (tin fluoride - NaF + SnCl2 (800 ppm Sn2+)); control (distilled water). The samples were submitted to an erosive/abrasive cycle with immersion in citric acid (lemon soda for 5 min, 4×/day, 5 days, with remineralization intervals in artificial saliva for 60 min). Abrasion was carried out with an electric brush (200 g/force) after the first and last cycles, 2x/day, and immediately afterward immersed in the tested solutions. Structure loss was obtained by optical profilometry. The data were subjected to analysis of variance and multiple comparison for each substrate separately. Results: For enamel there was a difference between the groups (p = 0.027), with the FS showing less loss of structure compared to the control 2.02 (±0.48). The FE group showed similar loss to the control and FS 2.32 (±0.58)ab. For dentin there was a difference between the groups (p = 0.011), with FE showing less loss of structure compared to the other groups, 0.82 (25% - 0.34; 75% - 0.95). Discussion: The protection of fluorides in erosive/abrasive challenges depends on the type and dental substrate. Conclusion: Mouthwash with sodium fluoride prior to erosive/abrasive challenges caused less loss of enamel surface, while for dentin, sodium fluoride associated with stannous chloride caused less loss of structure.

Objetivo: Avaliar a proteção oferecida por soluções para bochecho de fluoreto de sódio ou cloreto de estanho associado ao fluoreto de sódio ao esmalte e à dentina, previamente à ciclagem erosiva e abrasiva. Materiais e Métodos: Amostras de esmalte e dentina foram obtidas a partir de incisivos bovinos e subdivididas em 3 grupos (n=10), de acordo com o princípio ativo fluoretado testado: FS (fluoreto de sódio - NaF (225 ppm)); FE (fluoreto de estanho - NaF + SnCl2 (800 ppm Sn2+)); controle (água destilada). As amostras foram submetidas a um ciclo erosivo/abrasivo com imersão em ácido cítrico (refrigerante de limão por 5 min, 4×/dia, 5 dias, com intervalos de remineralização em saliva artificial por 60 min). A abrasão foi realizada com escova elétrica (200 g/força) após o primeiro e o último ciclos, 2×/dia, e logo em seguida imersos nas soluções testadas. A perda de estrutura foi obtida por perfilometria óptica. Os dados foram submetidos à análise de variância e comparação múltipla para cada substrato separadamente. Resultados: Para esmalte houve diferença entre os grupos (p = 0,027), tendo o FS apresentados menor perda de estrutura comparado ao controle 2,02 (±0,48). O grupo FE apresentou perda similar ao controle e ao FS 2,32 (±0,58)ab. Para dentina houve diferença entre os grupos (p = 0,011), sendo que o FE apresentou menor perda de estrutura comparado aos demais grupos 0,82 (25% - 0,34; 75% - 0,95). Discussão: A proteção dos fluoretos em desafios erosivos/abrasivos depende do tipo e do substrato dental. Conclusão: O bochecho com fluoreto de sódio previamente aos desafios erosivos/abrasivos apresentou menor perda de superfície em esmalte, enquanto para dentina o fluoreto de sódio associado ao cloreto de estanho apresentou menor perda de estrutura.

Efficacy of ClinproTMXT Varnish surrounding brackets on the enamel surface of white spot lesion

Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

UTILIZAÇÃO CLÍNICA DO TETRAFLUORETO DE TITÂNIO NA ODONTOLOGIA: UMA REVISÃO CRÍTICA / CLINICAL USE OF TITANIUM TETRAFLUORIDE IN DENTISTRY: A CRITICAL REVIEW

Objetivo: avaliar a eficácia preventiva e terapêutica do tetrafluoreto de titânio (TiF4) em ensaios clínicos randomizados (ECR) e não randomizados (N-ECR). Materiais e Métodos: estudos sobre a eficácia do tetrafluoreto de titânio em esmalte e dentina, testado em diferentes veículos e formulações, foram obtidos nas seguintes bases de dados: PubMed, Cochrane Library, Scopus, Web of Science, LILACS/BBO e EMBASE, sem limite de ano de publicação ou idioma. Resultados: seis estudos com abordagem preventiva e terapêutica do TiF4 sobre a superfície dentária foram incluídos. Destes, três ECR e três N-ECR. Por meio da tabulação e categorização dos artigos, notou-se que o TiF4 obteve efeito positivo na prevenção da cárie em três estudos; efeito nulo no tratamento de lesões cariosas em dois; e apenas um estudo apresentou efeito negativo no tratamento da erosão quando comparado aos outros compostos fluoretados. Conclusão: Embora haja estudos na literatura, com distintos delineamentos metodológicos comprovando a eficácia do TiF4, tanto na prevenção quanto no tratamento de lesões de cárie e erosivas, ainda é necessário que mais ensaios clínicos randomizados sejam realizados, com o intuito de validar a eficácia da utilização clínica deste composto fluoretado.

Objective: to analyze the preventive and therapeutic efficacy of titanium tetrafluoride (TiF4) in studies with a methodological design based on randomized clinical trials (RCT) and non-randomized (N-RCT). Materials and Methods: data on the behavior of titanium tetrafluoride in enamel and dentin, tested in several vehicles and formulations, were extracted in the following databases: PubMed, Cochrane Library, Scopus, Web of Science, LILACS/BBO and EMBASE, without limitation of publication year or language. Results: six studies were obtained with preventive and therapeutic approach of TiF4 on the dental surface. Three studies were RCT and three were N-RCT. Through tabulation and categorization of articles, it was noticed that TiF4 showed a positive effect in caries prevention in three studies; a null effect in caries treatment was observed in two; and only one study had a negative effect in erosion treatment when compared to the other fluoridated compounds. Conclusion: Although there are several studies in the literature, with different methodological designs, proving the efficacy of TiF4 both in prevention and in therapeutic treatments of caries and dental erosion, it is still necessary that more clinical controlled studies be conducted, in order to validate the clinical use efficacy of this fluoride compound.

In vitro and in situ caries-preventive effect of a new combined fluoride and calcium experimental nanocomposite solution

Abstract To assess the in vitro and in situ effect of experimental combined fluoride and calcium nanocomposite solutions on dental caries prevention. Nanocompound mesoporous silica (MS) with calcium (Ca) and sodium fluoride (NaF) - (MSCaNaF); MS with NaF (MSNaF), NaF solution (positive control), and deionized water (negative control - CG) were studied. The specimens (n=130) were submitted in vitro to a multispecies biofilm in the presence of 2% sucrose. After 24 h and 48 h, the culture medium pH, the percent of surface mineral loss (%SML), and lesion depth (ΔZ) were analyzed. In the in situ study, 10 volunteers participated in four phases of 7-days each. The products were applied on the specimens (n=240) before 20% sucrose solution drips. The polysaccharides (SEPS and IEPS), %SML and roughness (Sa) were evaluated. There was an in vitro decrease in pH values in 24h and 48h, compared to baseline. The MSCaNaF and MSNaF groups obtained lower values of %SML and ΔZ (p < 0.05) than CG and NaF after 24h and were similar to NaF after 48h (p<0.05). In situ results showed similar SEPS and IEPS among all groups after 48h. An after 7-days, the nanocomposites had similar values (p>0.05), while NaF was similar to CG (p>0.05). After 48h, the MSCaNaF and MSNaF reduced the %SML (p<0.05). After 7-days, both experimental nanocomposites were similar to NaF (p>0.05). Regarding Sa, MSCaNaF was better than NaF for both periods (p<0.05). The nanocomposites controlled the in vitro and in situ enamel demineralization, mainly in the initial periods.

Level of natural fluoride in public water supply: geographical and meteorological factors in Brazil's Northeast

Abstract This study analyzed the relationships between the concentration of natural fluoride in public water supply and meteorological and hydrographic factors in a northeastern region of Brazil. This was a descriptive, analytical, ecological, longitudinal, and field study conducted by collecting water in 23 municipalities (2019 to 2020) of four macroregions of Paraíba (Brazil): coast (1), borborema (2), agreste (3), and outback (4). Four collection sites were selected per municipality: two near and two distant from the water treatment plant. Fluoride concentration was determined using a combined ion-specific electrode and classified according to the Collaborating Center of the Ministry of Health in Oral Health Surveillance. Meteorological, hydrographic, and population characteristics were also collected. All analyzed samples showed natural fluoride; macroregions 2 and 4 showed the highest mean fluoride concentration, macroregion 4 presented the highest mean temperature, and all macroregions showed a similar pattern of precipitation. The mean fluoride concentration of the four macroregions was below the appropriate value to prevent caries. An increase in precipitation would decrease the fluoride concentration in water. In conclusion, the concentration of natural fluoride varied according to meteorological and hydrographic factors. The concentration in surface waters increased during periods of low precipitation. Therefore, this study provided important information to support implementation of community water fluoridation in this region.

Situational diagnosis of policies in Latin American and Caribbean countries for the use of fluoride and reduction of sugar consumption

Abstract Policy evaluation and guidance on fluoride use and sugar consumption in Latin American and Caribbean countries (LACC) may provide a scientific evidence basis for policymakers, dental professionals, civil society organizations and individuals committed to improving public oral health. A cross-sectional study was conducted to evaluate the extent of implementation of policies/guidelines on fluoride use, and sugar consumption in LACC. The study had two stages. First a questionnaire covering four major areas was developed: fluoridation of public water supplies; salt fluoridation; fluoride dentifrices, and sugar consumption. Then, the questionnaire was applied to collect data among representative participants in public oral health from LACC. Ninety-six participants from 18 LACC answered the questionnaire. One-hundred seventy documents were attached, and 285 links of websites were provided by the respondents. Implementation of policies and guidelines on water and table salt fluoridation and processed and ultra-processed food consumption were found in most countries, with some issues in the consensus and coverage. Thus, differences were identified in the extent of implementation of public oral health strategies on sugar consumption and fluoridation among the countries. There is no consensus on the policies in LACC to reduce sugar consumption and for the use of fluoride. A few policies and guidelines were applied in isolated countries, with a variety of strategies and standards. For future actions, it will be important to encourage the development of strategies and public policies within countries, and to evaluate the effectiveness of existing policies in reducing dental caries and in improving oral health in LACC.

In-vitro effect of a single application of CPP-ACP pastes and different fluoridated solutions on the prevention of dental caries around orthodontic brackets

ABSTRACT Objective: To assess the in-vitro effect of single applications of CPP-ACP pastes and different fluoridated solutions on the prevention of dental caries around orthodontic brackets. Material and Methods: Tooth/bracket sets (n=65) were immersed in artificial saliva (1h at 37ºC) and randomly subjected to single applications (100µL; 1min) of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP emulsion), CPP-ACP with fluoride (CPP-ACPF emulsion), solutions of titanium tetrafluoride (TiF4) or sodium fluoride (NaF), or no treatment (CG). Multispecies biofilm (5 x 105 CFU/mL) was formed in the presence of 2% sucrose. After 24 h, the pH and the concentration of total soluble fluoride (TSF) were analyzed by culture medium. The presence of active white spot lesions (WSL) evaluated by macroscopic examination and the percent surface mineral loss (%SML) were analyzed. Also, the topography of enamel was detected by analysis of scanning electron microscopy (SEM). The data was assessed by chi-square, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Results: Fluoride-containing compounds led to a smaller pH reduction than did CPP-ACP and CG (p<0.05). There was difference in TSF between the groups (p<0.05), denoted as TiF4> NaF > CPP-ACPF > CPP-ACP > CG. Regarding the presence of WSL and %SML, the NaF group obtained lower values (p<0.05), while TiF4 and CPP-ACPF were similar (p>0.05). SEM demonstrated that fluoride-free groups had a larger surface dissolution. Conclusion: Fluoridated groups including solutions and CPP-ACPF were more effective than CPP-ACP in reducing enamel demineralization around orthodontic brackets after a single application.

RESUMO Objetivo: Avaliar in-vitro o efeito de uma aplicação única de cremes dentais de CPP-ACP e diferentes soluções fluoretadas na prevenção da cárie dentária ao redor de braquetes ortodônticos Material e Métodos: O conjunto dentes/braquetes (n=65) foi imerso em saliva artificial (1h em 37°C) randomizado e submetido a tratamento único (100µL; 1 min) de emulsão de fosfopeptídeo de caseína-fosfato de cálcio amorfo (CPP-ACP) e CPP-ACP associado ao flúor (CPP-ACPF); soluções de tetrafluoreto de titânio (TiF4) e fluoreto de sódio (NaF); e ausência de tratamento (GC). Biofilmes multiespécie (5 x 105 CFU/mL) foram formados na presença de sacarose a 2%. Após 24h, o pH e a concentração de fluoreto solúvel total (FST) foram analisados pelo meio de cultura. Foram avaliadas a presença de lesões de mancha branca (LMB), por meio da análise de macroscopia visual, e a porcentagem de perda de dureza (%PD). Também foi verificada a topografia do esmalte, usando microscopia eletrônica de varredura (MEV). Os dados foram analisados pelos testes Qui-quadrado, Kruskal-Wallis e Mann-Whitney (p < 0,05). Resultados: Os compostos contendo flúor levaram a uma redução do pH menor do que o CPP-ACP e GC (p<0,05). Houve diferença no FST entre os grupos (p <0,05), sendo TiF4> NaF > CPP-ACPF > CPP-ACP > GC. Quanto à presença de LMB e à %PD, o grupo NaF obteve os menores valores (p<0,05), enquanto TiF4 e CPP-ACPF foram semelhantes (p> 0,05). A MEV demonstrou que os grupos sem flúor tiveram uma dissolução superficial maior. Conclusão: Os grupos fluoretados, incluindo soluções e CPP-ACPF, foram mais eficazes do que o CPP-ACP sem flúor na redução da desmineralização do esmalte ao redor dos braquetes ortodônticos após uma única aplicação.

Dose-response relationship between toothpaste soluble fluoride absorbed in the gastrointestinal tract and saliva fluoride secretion

Aim: This study aimed to evaluate if there is a dose-response relationship between toothpaste chemically soluble fluoride absorbed in the gastrointestinal tract and fluoride secreted by saliva, giving support to the use of saliva as surrogate for plasma fluoride. Methods: A 4-phase single blind study was conducted, in which 10 participants were subjected in each phase to one of the assigned treatment groups: group I: fresh sample of a Na2FPO3/CaCO3-based toothpaste with 1,334 µg F/g of total soluble fluoride (TSF) and groups II­IV: aged samples of this toothpaste presenting TSF concentrations of 1,128, 808, and 687 µg F/g, respectively. In all phases, the participants ingested an amount of toothpaste equivalent to 70.0 µg F/Kg body weight, as total fluoride (TF). Saliva and blood samples were collected before (baseline) and up to 180 min after toothpaste ingestion as indicator of fluoride bioavailability. F concentration in saliva and blood plasma was determined with a fluoride ion-specific electrode. The areas under the curve (AUC) of F concentration versus time (AUC = ng F/mL × min) and the peaks of fluoride concentration (Cmax) in saliva and plasma were calculated. Results: A significant correlation between mg of TSF ingested and the AUC (r=0.47; p<0.01), and Cmax (r=0.59; p<0.01) in saliva was found; for TF, the correlation was not significant (p>0.05). In addition, the correlations between plasma and saliva fluoride concentrations were statistically significant for AUC (r=0.55; p<0.01) as for Cmax (r=0.68; p<0.01). Conclusion: The findings support that saliva can be used as a systemic biomarker of bioavailable fluoride present in Na2FPO3/CaCO3-based toothpaste

Dentin permeability after pretreatment with titanium tetrafluoride and self-etching or universal adhesive systems

Aim: To evaluate dentin permeability after pretreatment with 2.5% aqueous solution of titanium tetrafluoride (TiF4), followed by a self-etching universal adhesive system. Methods: Forty dentin discs (1.5 mm thick) were randomly divided into groups according to the application or non-application of a pretreatment, and the type of adhesive system to be tested (two-step self-etching/ Clearfil SE Bond/ Kuraray Medical, or universal adhesive system/ Single Bond Universal/ 3M ESPE). Both sides of the discs were conditioned with 37% phosphoric acid to remove the smear layer. The first hydraulic conductivity measurement (L1) was performed in a permeability machine, under 5 PSI pressure. The samples were sanded again to form a standardized smear layer. The teeth designated for pre-treatment with TiF4 received the TiF4 solutions applied actively for 60 seconds, and the adhesive systems were applied according to the manufacturer's instructions. Then, a new hydraulic conductivity measurement (L2) was performed for the purpose of calculating the hydraulic conductance at a later time, considering the water viscosity and the thickness of the specimen. The percentage (L) of dentin permeability after application of the adhesive system was obtained (L (%) = [(L1-L2) x100] / L1). The Mann-Whitney non-parametric test was applied. Results: There was no difference between the two adhesive systems, or between the groups with or without pretreatment, as regards dentin permeability (p>0.05). Conclusion: Pretreatment with 2.5% TiF4 did not influence dentin permeability, irrespective of the adhesive system used

Non-Invasive Methods and the Use of Infiltrating Resins for the Control of Caries Progression in Deciduous Teeth: A Systematic Review and Meta-Analysis

ABSTRACT Objective: To evaluate the influence of non-invasive treatment associated with the use of infiltrating resin for managing caries lesions in primary teeth. Material and Methods: A systematic review was performed by selecting articles from 6 online databases, using a search algorithm and eligibility criteria for data extraction and data synthesis for the papers included. Clinical trials involving primary teeth with incipient caries lesions (1/2 of the enamel or 1/3 of the outer dentin) were included, presenting full text and answering the study's guiding question. This study used the RoB 2 tool for the risk of bias assessment and GRADE for certainty of evidence. Random effects meta-analyses were implemented, and lesion progression treatment effects were estimated through relative risk (RR) and associated 95% confidence intervals. Results: A total of 440 studies were found. After analyzing the inclusion criteria and removal of duplicates, eight studies were analyzed for quality evidence. Five of the eight studies included in this review contributed to the meta-analysis, all with some reflections regarding the risk of bias. Overall, the results of the meta-analysis showed that non-invasive treatment, when associated with the use of infiltrating resins, significantly reduced the risk of caries progression in relation to the treatment without this addition for follow-up periods ranging from 12 months to 2 years (RR 0.51 [0.40-0.65]). Conclusion: There is moderate certainty of evidence that the use of infiltrating resins associated with non-invasive treatments decreases the risk of caries progression in primary teeth with incipient caries lesions (1/2 of the enamel or 1/3 of the dentin outer) when combined with non-invasive control methods alone.

Effect of an aqueous 4% titanium tetrafluoride solution on preventing caries in orthodontic patients: a controlled clinical trial

ABSTRACT Introduction: Titanium tetrafluoride (TiF4) is a fluoride compound that, when is applied over enamel, promotes a protection against demineralization through a titanium dioxide (TiO2) acid-resistant coat. Objectives: This study sought to verify the hypothesis that a single application of 4% TiF4 increases the resistance of enamel to dental demineralization in orthodontic patients. Materials and Methods: This controlled clinical trial followed CONSORT guidelines and investigated the prevention of enamel demineralization, fluoride retention, and the presence of a Ti layer after TiF4 application on banded teeth exposed to clinical cariogenic biofilm. Forty premolars were divided into a control group (CG; n = 20) and a test group (TG; n = 20). Teeth from both groups received prophylaxis and orthodontic bands with a cariogenic locus. In the TG, all teeth additionally underwent aqueous 4% TiF4 solution application after prophylaxis before being banded. After one month, teeth from both groups were extracted and prepared to assess the microhardness, fluoride retention, and evaluation of the Ti coating over the enamel surface. All data were analyzed with a paired Student's t-test (p<0.05). Results: Enamel microhardness and fluoride uptake were higher in TG than in CG, while the Ti layer could be seen over TG teeth that received TiF4 application. Conclusion: Under clinical circumstances, the 4% aqueous TiF4 solution was effective in preventing enamel mineral loss through increasing the enamel resistance to dental demineralization, enhancing its microhardness and fluoride uptake, and forming a Ti coat.

RESUMO Introdução: O tetrafluoreto de titânio (TiF4) é um composto fluoretado que, quando aplicado sobre o esmalte dentário, promove uma proteção contra desmineralização, por meio da formação de uma camada ácido-resistente de dióxido de titânio (TiO2). Objetivos: O presente estudo buscou verificar a hipótese de que uma única aplicação de TiF4 a 4% aumenta a resistência do esmalte dentário à desmineralização, em pacientes ortodônticos. Material e Métodos: Esse ensaio clínico controlado seguiu as diretrizes do CONSORT e investigou a prevenção da desmineralização do esmalte, retenção de flúor e a presença de uma camada de titânio após a aplicação do TiF4 em dentes bandados expostos ao biofilme cariogênico clínico. Quarenta pré-molares foram divididos em dois grupos: controle (GC; n = 20) e teste (GT; n = 20). Dentes de ambos os grupos receberam profilaxia e bandas ortodônticas com nicho cariogênico. No GT, todos os dentes também foram submetidos a aplicação de solução aquosa de TiF4 4 após profilaxia, antes de serem bandados. Após um mês, os dentes de ambos os grupos foram extraídos e preparados para avaliar a microdureza, retenção de flúor e avaliação da camada de titânio sobre a superfície do esmalte. Todos os dados foram analisados pelo teste t pareado (p<0,05). Resultados: A microdureza do esmalte e a absorção de flúor foram mais elevadas no GT do que no GC, enquanto uma camada de titânio pôde ser observada sobre os dentes do GT, que receberam aplicação TiF4. Conclusão: Em circunstâncias clínicas, a solução de TiF4 a 4% foi eficaz na prevenção da perda mineral do esmalte, por meio do aumento da resistência à desmineralização dentária, aumentando sua microdureza e absorção de flúor, e formando uma camada protetora de titânio.

Development and Validation of an Educational Comic Book for Guidance on the Safe Use of Fluoride Toothpaste by Children

ABSTRACT Objective: To describe the elaboration and content validation of a comic book for guidance on the safe use of fluoride toothpaste by children. Material and Methods: Study on the development of educational technology carried out in four phases: 1 - literature review and script; 2 - elaboration of the material (illustrations, layout and design), 3 - validation (Content Validity Index = CVI and Flesch Readability Index = FI), 4 - pilot test to legitimize the material with the target population. Thirty-one individuals participated in the validation, being 07 expert judges and 24 representatives of the lay population, responsible for the daily care of preschool and school-age children. Results: In the validation, CVI= 0.97 (97%), indicating high agreement of the judges' answers; and FI = 92%, which corresponds to "very easy to understand" reading. In the pilot test carried out with the lay population, the 3 assessment blocks had CVI=1.0 (100%). Conclusion: The comic book proved to be valid regarding appearance and content and can be used for health education activities for adults on the use of fluoride toothpaste for oral hygiene in children.

Effect of fluoride gels with nano-sized sodium trimetaphosphate on the in vitro remineralization of caries lesions

Abstract Objective To evaluate the effects of fluoride (F) gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMPmicro and TMPnano, respectively) on the in vitro remineralization of caries-like lesions. Methodology Bovine enamel subsurface lesions (n=168) were selected according to their surface hardness (SH) and randomly divided into seven groups (n=24/group): Placebo (without F/TMP), 4,500 ppm F (4500F), 4500F + 2.5% TMPnano (2.5% Nano), 4500F + 5% TMPnano (5% Nano), 4500F + 5% TMPmicro (5% Micro), 9,000 ppm F (9000F), and 12,300 ppm F (Acid gel). The gels were applied in a thin layer for one minute. Half of the blocks were subjected to pH cycling for six days, whereas the remaining specimens were used for loosely- (calcium fluoride; CaF2) and firmly-bound (fluorapatite; FA) fluoride analysis. The percentage of surface hardness recovery (%SHR), area of subsurface lesion (ΔKHN), CaF2, FA, calcium (Ca), and phosphorus (P) on/in enamel were determined. Data (log10-transformed) were subjected to ANOVA and the Student-Newman-Keuls' test (p<0.05). Results We observed a dose-response relation between F concentrations in the gels without TMP for %SHR and ΔKHN. The 2.5% Nano and 5% Micro reached similar %SHR when compared with 9000F and Acid gels. For ΔKHN, Placebo and 5% Nano gels had the highest values, and 5% Micro, 2.5% Nano, 9000F, and Acid gels, the lowest. All groups had similar retained CaF2 values, except for Placebo and Acid gel. We verified observed an increase in Ca concentrations in nano-sized TMP groups. Regarding P, TMP groups showed similar formation and retention to 9000F and Acid. Conclusion Adding 2.5% nano-sized or 5% micrometric TMP to low-fluoride gels lead to enhanced in vitro remineralization of artificial caries lesions.

Effect of phenylmethylsulfonyl fluoride, a protease inhibitor, on enamel surface remineralization

Phenylmethylsulfonyl fluoride (PMSF) is a protease inhibitor widely used in research, but fluoride is released during its action and this knowledge has been neglected in dental research. Aim: to evaluate if fluoride released by salivary protease action on PMSF affects enamel remineralization and fluoride uptake. Methods: Groups of 10 enamel slabs, with caries-like lesions and known surface hardness (SH), were subjected to one of the following treatment groups: Stimulated human saliva (SHS), negative control; SHS containing 1.0 µg F/mL (NaF), positive control; and SHS containing 10, 50 or 100 µM PMSF. The slabs were subjected to a pH-cycling regimen consisting of 22 h/day in each treatment solution and 2 h/day in a demineralizing solution. After 12 days, SH was again measured to calculate the percentage of surface hardness recovery (%SHR), followed by enamel fluoride uptake determination. The time-related fluoride release from 100.0 µM PMSF by SHS action was also determined. Data were analyzed by ANOVA followed by Newman-Keuls test. Results: The release of fluoride from PMSF by SHS was rapid, reaching a maximum value after 10 min. Fluoride released from PMSF was more effective in enhancing %SHR and increasing fluoride uptake in enamel compared with SHS alone (p < 0.05); furthermore, it was equivalent to the positive control (p > 0.05). Conclusion: In conclusion, fluoride released by saliva from PMSF is available to react with enamel and needs to be taken into account in research using this protease inhibitor

Randomized controlled trial on the effectiveness of silver diamine fluoride in arresting caries in Lagos, Nigeria

Treatment of dental caries in children still remains challenging due to lack of cooperation with conventional treatment modalities. Recently, the use of Silver Diamine Fluoride (SDF) has proved useful in addressing this challenge. Aim: This clinical trial aimed to evaluate the effectiveness of Silver Diamine Fluoride (SDF) in arresting caries in children in Lagos, Nigeria. Methods: This was a phase III balanced randomized controlled school based interventional study on 240 children. The study group was treated with SDF while GIC was used in the control group. Follow up visits in 2 weeks, 1 month, and 3 months were carried out to assess the treatment outcome. Inferential statistics with the use of Pearson Chi-square test and Independent Student t-test were used at 5% level of significance. Results: There was significant relationship between SDF and caries arrest in 2 weeks, 1 month and 3 months' assessment period (p = 0.001). The control group showed continuous decline (71.7%, 54.3% and 50.9%) in restorative success from 2 weeks to 3 months respectively. The mean ± SD and Confidence Interval (CI) of arrested caries in the SDF group were 113± 1.24 and 113.1 ­ 113.5 respectively. In the control group the mean ± SD and CI of restorative success were 69.3±11.8 and 67.2 ­ 71.4. The effect size was 5.24. Conclusion: The result of the study showed that SDF was effective in arresting caries in children without any harm and there was statistically significant difference in the use of 38% SDF in arresting caries in children

Comparative evaluation of remineralisation potential of bioactive glass, casein phosphopeptide-amorphous calcium phosphate and novel strontium-doped nanohydroxyapatite paste: An In-Vitro study

Background: Many studies explained the importance of remineralisation of early carious lesions with various remineralising agents. In the present study, we incorporated the remineralising agents in a dentifrice, applied that in artificial enamel caries and evaluated their remineralising potential and compared the efficacy among the three. Aim: To evaluate and compare the remineralisation potential of a dentifrice containing bioactive glass, casein phosphopeptide?amorphous calcium phosphate and novel laboratory synthesised strontiumdoped nanohydroxyapatite paste in artificial enamel caries. Methods and Materials: 120 enamel specimens were divided into 4 groups of 30 specimens each, based on the type of dentifrice applied: GI ? conventional toothpaste (control group), GII ? calcium sodium phosphosilicate (Novamin), GIII ? casein phosphopeptide?amorphous calcium phosphate (GC tooth mousse) and GIV? Novel strontiumdoped nanohydroxyapatite paste (SrnHAp paste). Specimens in all the groups were subjected to demineralisation, and calcium/phosphorous ratio was analysed followed by remineralisation and the mean calcium–phosphorus ratio was assessed using a scanning electron microscope and energy dispersing X?ray analysis. Statistical Analysis: Data were analysed using IBM SPSS Statistics for Windows Software, version 22 (IBM Corp., Armonk, NY, USA). Descriptive statistics were used to calculate the mean and standard deviation. Kruskal?Wallis, ANOVA and Mann–Whitney tests were used. The level of significance was set at 5%. Results and Conclusion: All except the control group showed a net increase in calcium and phosphorous values after application of the respective remineralising agents in respective groups. Inter?group comparison revealed that Group IV ? SrnHAp paste yields higher net calcium and phosphorous values than other groups. Hence, novel SrnHAp can be considered as the material of choice in remineralising early enamel carious lesions

Efeito de géis fluoretados suplementados com trimetafosfato de sódio nanoparticulado sobre a remineralização do esmalte dental in situ / Effect of fluoride gels supplemented with nanosized sodium trimetaphosphate on enamel remineralization in situ

O objetivo do presente estudo foi avaliar o efeito de géis fluoretados suplementados com nanopartículas de Trimetafosfato de Sódio (TMP) sobre a remineralização de lesões de cárie artificiais in situ. Blocos de esmalte dental bovino (n=160) foram aleatoriamente divididos entre os grupos de estudo após análise de dureza de superfície (DS) e indução de lesões de subsuperfície. Os géis testados foram: Placebo (sem flúor ou TMP ­ controle negativo), 9000 µg F/g (9000F ­ controle positivo), 4500 µg F/g + 5% TMP microparticulado (4500 5%TMPmicro) e 4500 µg F/g + 5% TMP nanoparticulado (4500 5%TMPnano). Dez voluntários utilizaram dispositivos palatinos contendo 4 blocos de esmalte durante 3 dias, após uma única aplicação dos géis, seguindo um protocolo duplo-cego e cruzado. Dois blocos de esmalte foram removidos imediatamente após a aplicação dos géis, para determinar a concentração de fluoreto de cálcio (CaF2) formado. Após cada fase, determinou-se a porcentagem de recuperação de dureza de superfície (%RDS) e CaF2 retido no esmalte. Os dados foram submetidos ANOVA de medidas repetidas e teste de Student-Newman-Keuls (p< 0.05). A maior %RDS foi observada para o gel 4500 5%TMPnano, seguido por 4500 5%TMPmicro, 9000F e Placebo, com diferenças significativas entre os grupos. Em relação ao CaF2 formado, a maior concentração foi observada para o grupo 9000F. Não foram observadas diferenças significativas entre os grupos 9000F, 4500 5%TMPmicro e 4500 5%TMPnano para concentrações de CaF2 retido. Conclui-se que a adição de TMP a géis fluoretados melhorou significativamente a remineralização de lesões de cárie in situ. O uso de TMP em escala nanométrica potencializou ainda mais este efeito(AU)

The present study aimed to evaluate the effect of fluoride gels supplemented with nano-sized sodium trimetaphosphate (TMP) on the remineralization of artificial caries lesions in situ. Bovine enamel blocks (n=160) were randomly distributed among study groups after surface microhardness (SH) analysis and induction of subsurface lesions. Test groups included: Placebo (without F and TMP ­ negative control), 9000 µg F/g (9000F ­ positive control), 4500 µg F/g + 5% micrometric TMP (4500 5%+ TMPmicro) and 4500 µg F/g + 5% nano-sized TMP (4500 + 5%TMPnano). Ten volunteers used palatal devices containing 4 enamel blocks during 3 days, after a single application of gels, following a double-blind and crossover protocol. Two enamel blocks were removed immediately after topical application of F to determine calcium fluoride (CaF2) formed on enamel. After each phase, the samples were analyzed by percentage of surface hardness recovery (%SHR) and CaF2 retained on enamel. Data were analyzed by repeated-measures ANOVA and Student-NewmanKeuls test (p< 0.05). The highest %SHR was observed for 4500 5%TMPnano gel, following by 4500 5%TPMmicro, 9000F, and Placebo, with significant differences among all groups. Regarding CaF2 formed, the highest concentration was observed in the 9000F group. No significant differences were observed among 9000F, 4500 5%TMPmicro and 4500 5%TMPnano groups for concentrations of CaF2 retained. It was concluded that the addition of TMP to gels improved the remineralization of caries lesions in situ. The use of nano-sized TMP further enhanced this effect(AU)